OSO DELTA COIL PP DCPP
Ideal for boilers - fully pre-plumbed - ErP A
DELTA coil pre-plumbed series is the most efficient pre-plumbed cylinder available, uitilising unique Vacuum Panel Insulation and is the only full range of ErP* A-rated cylinders available from 150 - 300 L. DELTA boasts 30 - 50% higher efficiency than rivals, translating into direct SAP gains. DELTA series can save enough energy to pay for the entire cylinder over its lifetime. Delta has holiday and anti-legionalla finctionality. * Energy-related Products Directive – 2009 / 125 / EC.
Delta pre-plumbed series has all the features and advantages of the Delta Coil series and is supplied pre-assembled with full G3 kit, circulation pump, twin heating zone & DHW motorised valves, auto bypass, AAV ,filling loop and programmable room stats. A sealed system kit is also separately available. Delta Pre-plumbed has lower heat losses than any other cylidner and is perfect for housebuilders striving to meet stringent SAP targets.
WHY CHOOSE DELTA PREPLUMBED?
• Reduce heat loss by 400 kWh* / year with NANOPUR and VIP*
• Supplied with programmable room stats
• 25 year warranty on the stainless steel pressure tank
*Compared to 200 L cylinder with EPS insulation
• Supported by BIM, see more by clicking BIM here
|Specifications||Unit||DC 150PP - 3 kW / 1 × 230 V + HX 0,8 m²||DC 180PP- 3 kW / 1 × 230 V + HX 0,8 m²||DC 210PP - 3 kW / 1 × 230 V + HX 0,8 m²||DC 250PP - 3 kW / 1 × 230 V + HX 0,8 m²||DC 300PP - 3 kW / 1 × 230 V + HX 0,8 m²|
|Product series||DELTA COIL PP||DELTA COIL PP||DELTA COIL PP||DELTA COIL PP||DELTA COIL PP|
|Product name||DC 150PP - 3 kW / 1 × 230 V + HX 0,8 m²||DC 180PP- 3 kW / 1 × 230 V + HX 0,8 m²||DC 210PP - 3 kW / 1 × 230 V + HX 0,8 m²||DC 250PP - 3 kW / 1 × 230 V + HX 0,8 m²||DC 300PP - 3 kW / 1 × 230 V + HX 0,8 m²|
|Usage||Hot water||Hot water||Hot water||Hot water||Hot water|
|Diameter — ⌀||mm||595||595||595||595||595|
|Height — H||mm||1005||1170||1270||1540||1750|
|Technical / ErP information|
|Thermostat set point||°C||60||60||60||60||60|
|Heat loss |
|Heat loss / 24 hrs - EN 12897||kWh/day||0.94||0.98||1.03||1.13||1.18|
|AEC (energy consumption)||kW /year||Not applicable||Not applicable||Not applicable||Not applicable||Not applicable|
|Energy efficiency||%||Not applicable||Not applicable||Not applicable||Not applicable||Not applicable|
|Tapping profile||3XS–XXL||Not applicable||Not applicable||Not applicable||Not applicable||Not applicable|
|Primary Heating Power||kW||17.2||17.1||16.9||16.6||16.5|
|Heat-up time ΔT 55°C Coil||Mins||24||30||32||43||49|
|Heat-up time ΔT 55°C upper element||Mins||Not applicable||Not applicable||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C lower element||Mins||Not applicable||Not applicable||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C coil 70%||Mins||17||21||22||30||34|
|Recovery time ΔT 55°C upper element 70%||Mins||Not applicable||Not applicable||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C lower element 70%||Mins||121||141||165||208||243|
MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.
BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.