OSO DELTA GEOCOIL DGC
Custom designed for heat pumps - ErP A
DELTA GEO series is the most efficient heat pump cylinder available, uitilising unique Vacuum Panel Insulation and is the only full range of ErP* A-rated cylinders available from 200 - 300 L. DELTA boasts 30 - 50% higher efficiency than rivals, translating into direct SAP gains. DELTA series can save enough energy to pay for the entire cylinder over its lifetime. Delta has holiday and anti-legionalla finctionality. * Energy-related Products Directive – 2009 / 125 / EC.
DELTA GEOCOIL— DGC is ideal for domestic hot water production from heat pumps up to 10 kW (200 L / 1,4m².) or 15 kW (300 L / 1,8m²), with the smooth piped, scale-resistant heating coil. The DGC units can be controlled either via its own thermostat or using thermistor probe(s). DELTA uses a high performance fully flooded design, with separate expansion vessel, and an ultra-grade INCOTEC immersion heater as booster (or back-up) above the heating coil, raising the DHW temperature to increase capacity. A complete set of inlet control valves comes standard. DELTA GEOCOIL is also supplied with a digital thermostat compatible with both S & Y plan systems which displays the water temperature and offers holiday and anti-legionella modes.
WHY CHOOSE DELTA GEOCOIL?
• Reduce heat loss by 400 kWh* / year with NANOPUR and VIP*
• Custom-designed for heat pumps up to 14 kW
• 25 year warranty on the stainless steel pressure tank
* Compared to 200 L cylinder with EPS insulation
• Supported by BIM, see more by clicking BIM here
|Specifications||Unit||DGC 200 - 3 kW / 1 × 240 V + HX 1,4 m²||DGC 250 - 3 kW / 1 × 240 V + HX 1,8 m²||DGC 300 - 3 kW / 1 × 240 V + HX 1,8 m²|
|Product series||DELTA GEOCOIL||DELTA GEOCOIL||DELTA GEOCOIL|
|Product name||DGC 200 - 3 kW / 1 × 240 V + HX 1,4 m²||DGC 250 - 3 kW / 1 × 240 V + HX 1,8 m²||DGC 300 - 3 kW / 1 × 240 V + HX 1,8 m²|
|Usage||Hot water||Hot water||Hot water|
|Diameter — ⌀||mm||595||595||595|
|Height — H||mm||1270||1540||1750|
|Packaging||mm||595 × 595 × 1305||595 × 595 × 1555||595 × 595 × 1765|
|Technical / ErP information|
|Capacity 40°C||L||Not applicable||Not applicable||Not applicable|
|Thermostat set point||°C||60||60||60|
|Heat loss |
|Heat loss / 24 hrs - EN 12897||kWh/day||1.03||1.13||1.18|
|AEC (energy consumption)||kW /year||Not applicable||Not applicable||Not applicable|
|Energy efficiency||%||Not applicable||Not applicable||Not applicable|
|Tapping profile||3XS–XXL||Not applicable||Not applicable||Not applicable|
|Primary Heating Power||kW||26||32||32|
|Heat-up time ΔT 55°C Coil||Mins||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C upper element||Mins||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C lower element||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C coil 70%||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C upper element 70%||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C lower element 70%||Mins||Not applicable||Not applicable||Not applicable|
MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.
BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.