Heat accumulator tank in stainless steel for TURBO system
MAXI series has shown class-leading operational durability for commercial hot water systems through the last 50 years. MAXI has been constructed with EVERLAST™ high-alloy stainless steel in combination with ULTRAWELD™ technology for optimal corrosion resistance. MAXI series can be modified according to customer requirements.
MAXI — M is ideal for heat accumulation in commercial installations, for instance from other models in the MAXI series (MS/MX/MC/MGC), or directly from an external energy source. MAXI has been optimized for the highly efficient TURBOSYSTEM with plate heat exchanger (optional capacity) and double sets of pumps for extra operational safety. With the TURBOSYSTEM, cold water is pumped from the bottom of the unit through the plate heat exchanger and choke valve and charges the accumulator tank from the top. When consumption is low, the plate heat exchanger can be used directly, and when consumption is high, additional capacity is provided by the MAXI unit. The system provides instant hot water even after the unit has been emptied.Installation kits for cold water inlet with shut-off valve, hot water outlet with mixing valve, plate heat exchanger with pumps (TURBOSYSTEM) and piping for connecting multiple units has been custom-made to fit directly on the MAXI series, with double sealing for an added layer of safety.
WHY CHOOSE MAXI?
• Accumulator provides optimal working conditions system
• Flexible choice of energy source with TURBOSYSTEM (add-on)
• 10 bar design pressure and class-leading corrosion resistance
• Supported by BIM, see more by clicking BIM here
|Specifications||Unit||M 400||M 600||M 1000|
|Product name||M 400||M 600||M 1000|
|Usage||Not applicable||Not applicable||Not applicable|
|Diameter — ⌀||mm||580||780||1000|
|Height — H||mm||2085||1900||2100|
|Packaging||mm||595 × 595 × 2240||800 × 800 × 2000||1020 × 1020 × 2200|
|Technical / ErP information|
|Capacity||Persons||Not applicable||Not applicable||Not applicable|
|Capacity 40°C||L||Not applicable||Not applicable||Not applicable|
|Thermostat set point||°C||Not applicable||Not applicable||Not applicable|
|Heat loss |
|Heat loss / 24 hrs - EN 12897||kWh/day||Not applicable||Not applicable||Not applicable|
|AEC (energy consumption)||kW /year||Not applicable||Not applicable||Not applicable|
|Energy efficiency||%||Not applicable||Not applicable||Not applicable|
|Tapping profile||3XS–XXL||Not applicable||Not applicable||Not applicable|
|Primary Heating Power||kW||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C Coil||Mins||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C upper element||Mins||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C lower element||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C coil 70%||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C upper element 70%||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C lower element 70%||Mins||Not applicable||Not applicable||Not applicable|
MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.
BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.