Unbeatable performance and lifetime economy
MAXI series has shown class-leading operational durability for commercial hot water systems through the last 50 years. MAXI has been constructed with EVERLAST™ high-alloy stainless steel in combination with ULTRAWELD™ technology for optimal corrosion resistance. MAXI series can be modified according to customer requirements.
MAXI STANDARD — MS is suitable for most commercial hot water demands, and is heated either with the integrated electric INCOTEC immersion heaters, or via an external energy source and the TURBOSYSTEM with plate heat exchanger (optional capacity) and double sets of pumps for extra operational safety. The electric immersion heaters has optional effect 5–15 kW, 230–400 V + N 3-phase, and is thermostat controlled 60–90 °C in three steps with separate safety thermostats. Contactors are not required and the support cable is connected directly to the central.
WHY CHOOSE MAXI STANDARD?
• Extreme operational durability with el. heaters w/o contactors
• Flexible choice of energy source with TURBOSYSTEM (add-on)
• 10 bar design pressure and class-leading corrosion resistance
• Supported by BIM, see more by clicking BIM here
|Specifications||Unit||MS 400 - 15 kW / 3 × 230 V||MS 600 - 15 kW / 3 × 230 V||MS 1000 - 15 kW / 3 × 230 V|
|Product series||MAXI STANDARD||MAXI STANDARD||MAXI STANDARD|
|Product name||MS 400 - 15 kW / 3 × 230 V||MS 600 - 15 kW / 3 × 230 V||MS 1000 - 15 kW / 3 × 230 V|
|Usage||Not applicable||Hot water||Hot water|
|Diameter — ⌀||mm||580||780||1000|
|Height — H||mm||2085||1900||2100|
|Packaging||mm||595 × 595 × 2240||800 × 800 × 2000||1020 × 1020 × 2200|
|Technical / ErP information|
|Capacity||Persons||Not applicable||Not applicable||Not applicable|
|Capacity 40°C||L||Not applicable||Not applicable||Not applicable|
|Thermostat set point||°C||75||70||70|
|Heat loss |
|Heat loss / 24 hrs - EN 12897||kWh/day||Not applicable||2.88||3.41|
|AEC (energy consumption)||kW /year||Not applicable||Not applicable||Not applicable|
|Energy efficiency||%||Not applicable||Not applicable||Not applicable|
|Tapping profile||3XS–XXL||Not applicable||Not applicable||Not applicable|
|Primary Heating Power||kW||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C Coil||Mins||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C upper element||Mins||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C lower element||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C coil 70%||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C upper element 70%||Mins||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C lower element 70%||Mins||Not applicable||Not applicable||Not applicable|
MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.
BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.